Registering Coded Speed Dialling - Canon FAX-L280 User Manual

Registering Coded Speed Dialling

By registering a fax/telephone number under a coded speed dialling code,
you can simplify dialling of that number to pressing Coded Dial and
entering the registered two-digit code.
When you register coded speed dialling, you will:
assign one of the 100 codes for the fax/telephone number you want to
register.
register the fax/telephone number under that coded speed dialling
code.
register a name for the coded speed dialling code. This name appears
in speed dialling lists, in reports, and at the top of the recipient's fax
if you use memory sending (
set the transmission type for the fax number you have registered. You
can set a subaddress and/or password if the other party's fax machine
requires these settings.
Follow this procedure to register coded speed dialling:
1
Open the one-touch speed dial panel.
2
Press Data Registration.
3
Use
REGISTRATION.
4
Press Set.
5
Use
SPEED DIAL.
6
Press Set.
7
Use
speed dialling code (00 to 99 )
under which you want to register the
fax/telephone number.
6-8
Speed Dialling
or to select TEL
. .
or to select CODED
. .
or to select the coded
. .
Alternatively, press Coded Dial
and use the numeric buttons to
enter the code.
If a coded speed dialling code
has already been registered, the
number registered under that
code appears.
If a group is already registered
under a coded speed dialling
code, GROUP DIAL appears.
p. 7-5).
DATA REGSTRATION
TEL REGISTRATION
1-TOUCH SPD DIAL
CODED SPEED DIAL
Ex:
@
00=
.
Ex:
@
01=
.
Chapter 6