Cancelling Sending; Automatic Dialling; Sending A Document Using One-Touch Speed Dialling Or Coded Speed Dialling Numbers; Special Dialling - Canon FAX-TT250 User Manual

Cancelling sending

1 Press [Stop].
The fax will feed out the document.

Automatic dialling

Sending a document using one-touch speed
dialling or coded speed dialling numbers
To use this feature you must first register numbers for one-touch speed dialling (see p. 22) or coded speed dialling
(see p. 23).
1 Load the document face down into the document feeder (see p. 13).
2 Press the one-touch speed dialling button under which the number you wish
to fax is registered.
-or-
Press [Coded Dial] and enter the appropriate two-digit coded speed dialling
code.
• The registered name and number appear.
• If you make a mistake, press [Stop]. Then press the correct one-touch speed dialling button or press [Coded Dial] and re-enter
the code.

Special dialling

Long-distance dialling

When you register a long-distance number, you may have to insert a pause within or after the number. For long-
distance dialling, the location and length of the pause may differ depending on the telephone system. To enter a
pause, press [Redial/Pause]. The length of this pause can be adjusted. See <MID PAUSE SET>, p. 41. A pause at the
end of a number is fixed at 10 seconds.
30
905 795 XXXX