Special Dialling; Entering Pauses In A Fax/Telephone Number - Canon FAX-L200? FAX-L280 User Manual

Special Dialling

Entering Pauses in a Fax/Telephone Number

You may need to enter pauses in a fax/telephone number in the following situations:
– When you dial or register an overseas number. The length and position of the pause
depends on the telephone system of your country.
– When your FAX is connected to a switchboard. For details, see p. 3-9.
Follow this procedure to enter pauses during regular dialling or when registering a
number for speed dialling:
1
When you come to the step that
requires you to enter the
fax/telephone number, use the
numeric buttons to enter the number
up to where a pause is necessary.
• If you enter the wrong number, press
Clear, then enter the correct number.
2
Press Redial/Pause to enter a pause.
• A pause entered within a number (p) is
two seconds* long.
• For a longer pause, press Redial/Pause
again for another two-second* pause.
Alternatively, you can change the length
of the pause (1 MID PAUSE SET,
p. 14-6).
3
Continue entering the rest of the fax/
telephone number with the numeric
buttons.
• If you enter the wrong number, press
Clear and start again from step 1.
4
To enter a pause at the end of the
number, press Redial/Pause.
• A pause at the end of a number (P) is
fixed to ten seconds.
5
Continue with the operation you are
performing.
* Four seconds in the UK and Hong Kong.
9-2
Special Features
Ex:
TEL=
Ex:
TEL=
Ex:
TEL= 00p811234
Ex:
TEL= 00p811234P
00
00P
Chapter 9