Chapter 6: Special Features Special Dialling; Dialling An Overseas Number (With Pauses) - Canon SmartBase PC1270D Fax Manual

Canon smartbase pc1270d fax guide
Hide thumbs Also See for SmartBase PC1270D:
Table of Contents

Advertisement

SB_PC1270D_FG_EN.book Page 1 Monday, February 18, 2002 12:20 PM
Chapter 6
Special Features
Special Dialling
This section explains special dialling features, such as dialling through a switchboard, dialling an overseas number, and
switching temporarily to tone dialling.

Dialling an Overseas Number (With Pauses)

When you dial or register an overseas number, you may need to insert a pause within and/or after the number. The length and
location of the pause depends on the telephone system of your country.
1
Press FAX to set to Fax Mode.
2
Prepare the document and load it facing down into the ADF.
• If you use the platen glass to send a document,
3
Use the numeric keys to dial the international access code.
• If you enter the wrong number, press Stop/Reset, then enter the correct number.
• For details on international access codes, contact your local telephone company.
4
If necessary, press Redial/Pause to enter a two-second* pause (p).
• For a longer pause, press Redial/Pause again for another two-second* pause.
Alternatively, you can change the length of the pause. (
* The pause length varies depending on the current country selection.
5
Use the numeric keys to dial the country code, the area code, and the fax/
telephone number of the other party.
• If you enter the wrong number, press Stop/Reset and start again from step 3.
6
If necessary, press Redial/Pause to enter a pause at the end of a number.
• A pause at the end of a number (P) is fixed to 10 seconds.
7
Press Start to begin scanning for sending.
• To cancel sending after dialling has started, press Stop/Reset then
4-7)
• To take advantage of the speed dialling features of your machine, register
frequently used overseas numbers for one-touch or coded speed dialling. (
2, 3-4)
p. 4-6.
p. 9-5)
(–). (
p.
pp. 3-
FAX 03/12 2001 15:30
FaxTel
STANDARD
Ex:
MEM IN USE
Ex:
(Currently used memory)
DOCUMENT READY
(Standby to scan)
TEL=
Ex:
TEL=
00P
Ex:
TEL=
00p81123
Ex:
TEL=
00p81123P
Ex:
0%
6
00
6-1

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Smartbase f141400

Table of Contents