LCD Messages
The following messages are displayed in the LCD when the FAX is
performing a task, or when it encounters an error. The error code appears
in the ACTIVITY REPORT (
Message
AUTO REDIAL
BUSY/NO SIGNAL
13-8
Troubleshooting
Error Code Cause
—
The unit is waiting to
redial the other party's
fax number because the
line was busy or the
other party did not
answer when you tried
to send the document.
#018
The fax/telephone
number you dialled is
busy.
The fax number dialled
was incorrect.
The other party's fax
machine is not working
properly.
The other party is not
using a G3 fax machine.
The telephone line type
setting on your unit is
incorrect.
The receiving fax
machine did not answer
within 55 seconds (after
all automatic redialling
attempts).
p. 11-3).
Action
Wait for the unit to automatically
redial the fax number (
Try sending the document at a
later time.
Check the fax number and dial
again.
Contact the other party and have
them check their fax machine.
Contact the other party to check
that they are using a G3 fax
machine.
Set your unit for your telephone
line type (
Contact the other party and have
them check their fax machine.
You can try to send the
document using manual sending
via the handset (
an overseas call, add pauses to
the registered number (
p. 7-9).
p. 3-8).
p. 7-6). For
p. 9-2).
Chapter 13