Network Switch System Operation - Canon FAX-L280 User Manual

10
Press Stop to return to standby
mode.
When the RX MODE setting is set to NET SWITCH, no other receive mode
can be selected with the Receive Mode button.

Network Switch System Operation

The procedure for using the network switch system is almost the same as
when using the unit over a normal telephone line. When you receive calls,
however, the unit will respond slightly differently as described below:
When you hear the telephone call ring pattern:
Pick up the handset and talk normally. If you hear a slow beep, it means
the call is from a fax machine trying to send a document. Press Start/Copy
to receive the fax. If you do not pick up the handset, the unit continues to
ring until the other party hangs up. If an answering machine is connected,
it takes over the call.
When you hear the fax call ring pattern (triple ring):
After the unit rings, it receives the document automatically.
Chapter 8
Ex:
15:00 NET SW.
Receiving Faxes
8-13