Canon FAX-L280 User Manual page 93

7
Enter up to 125 fax numbers you
want to send to using any of the
following methods:
One-touch speed dialling:
Press the one-touch speed
dialling button(s) you want.
Coded speed dialling:
Press Coded Dial, then use the
numeric buttons to enter the
two-digit code you want. Repeat
for other codes.
Regular dialling:
Use the numeric buttons to
enter the fax number you want,
then press Set.
If you enter the wrong destination, press Clear, then enter the correct
destination.
To review the destinations entered, use
numbers.
8
Press Start/Copy to begin scanning
the document into the FAX's
memory.
When the preset time is reached,
the FAX sends the document to
the destination(s) you specified
in step 7.
You can register up to 20 different delayed sending operations.
If the FAX's memory becomes full while scanning your document,
MEMORY FULL will appear in the LCD. If this happens, you will not
be able to send the document at a preset time. Remove the remainder
of the document from the ADF (you may need to open the operation
panel to do so).
Since the FAX is multitasking, you can perform other tasks even
when your FAX is set for delayed sending.
Chapter 7
Be sure to press Coded
Dial before each code.
You can only enter one
fax number this way.
Ex:
TEL=905 795 1111
Ex:
@
01
.
Ex:
TEL=03 3758 2111
Ex:
TEL= 2 887 0166
or to scroll through the
. .
Sending Faxes
7-15