Throttle Cable Adjustment - Yamaha Fazer Service Manual

IDLING 'CO' MEASUREMENT AND ADJUSTMENT/

THROTTLE CABLE ADJUSTMENT

¿
ç
5. Adjust :
• 'CO' concentration
ææææææææææææææææææææææææææææææææææ
Adjustment steps :
• Turn the pilot screw ¿ in or out until the speci-
fied 'CO' concentration is obtained.
Turning in ” 'CO' concentratin decreases
Turning out ” 'CO' concentration increases
NOTE :
For adjusting the Engine idling speed use the
throttle stop screw À. Do not adjust Engine Idle
RPM by using the Pilot Screw.
• After adjusting, 'CO' concentration as
specified, remove the 'CO' tester, make
sure that the Engine idling speed has not
changed.
ææææææææææææææææææææææææææææææææææ
THROTTLE CABLE ADJUSTMENT
NOTE :
Prior to adjusting the Throttle Cable free play,
the Engine idling speed should be adjusted.
1. Check :
• Throttle cable free play ç
Out of specification Ÿ Adjust.
Free play : 3 ~ 7 mm
At Throttle Grip flange
2. Adjust :
• Throttle Cable free play
ææææææææææææææææææææææææææææææææææ
Adjustment steps :
NOTE :
Never accelerate the Throttle when stopping the
Engine.
3-9
INSP
ADJ