Yamaha Fazer Service Manual page 110

ENGINE ASSEMBLY AND ADJUSTMENTS
¿
è
CRANKSHAFT
NOTE :
Hold the Connecting Rod at Top End with one
hand while turning the Nut of the Installing Tool
with the other. Operate the Installing Tool until
¿
the Crankshaft is seated against the Bearing.
To avoid scratching the Crankshaft and to
ease the Installation procedure, apply Engine
Oil onto each Bearing and crankcase LH.
NOTE :
When installing the balancer shaft, align the
punched mark ç on the crankshaft drive gear
ç
with the punched mark è on the balancer gear.
¿
4-36
1. Insert :
• CrankShaft in the Crankcase (L.H.)
2. Attach :
• Crankshaft Installing Tool on Crankshaft
Crankshaft Installing Tool
YSST - 266
Spacer
YSST - 267
3. Install :
• Crankshaft by tightening the Nut ¿
CAUTION:
WARNING
4. Install :
• Balancer shaft ¿
5. Install :
• Neutral Switch ¿
ENG