FRONT WHEEL AND FRONT BRAKES
¿
Á
À
¿
À
5. Measure :
• Front Wheel runout using a height gauge
Over the specified limits Ÿ Correct/Replace
Front Wheel runout limits :
Radial ç : 1.5 mm (max)
Lateral è : 1.5 mm (max)
6. Inspect :
• Front Wheel Bearings
Bearings allow free play in the Wheel Hub
or the Wheel does not turn smoothly Ÿ
Replace
• Oil Seals
Wear/damage Ÿ Replace
7. Inspect :
• Collar
Grooved Wear Ÿ Replace the Collar and
the Oil Seal as a set
BRAKE SHOE PLATE DIASSEMBLY
1. Remove :
• Bush ¿
• Meter Gear À
Remove the bush using a Meter Gear
Bush Tool Á
Nipple Tightening Tool
YSST - 629
SPEEDOMETER GEAR INSPECTION
1. Inspect :
• Meter Drive Gear ¿
• Meter Gear À
6-5
CHAS