Engine; Valve Clearance Checking Adjustment - Yamaha Fazer Service Manual

VALVE CLEARANCE CHECKING AND ADJUSTMENT
Â
¿
¿

ENGINE

VALVE CLEARANCE CHECKING AND
ADJUSTMENT
NOTE :
Valve clearance checking and adjustment
should be made with the Engine in cold condi-
tion, at room temperature.
When the Valve clearance is to be measured or
adjusted, the Piston must be at Top Dead Cen-
ter (T.D.C.) on the compression stroke and
marking on Cam Sprocket should be aligned
with the marking on Cylinder Head.
1. Remove :
Á
2. Remove :
À
3. Remove :
¿
À
4. Measure :
3-6
INSP
ADJ
• Side Covers
• Seat
• Fuel Tank
Refer to "SIDE COVERS, SEAT AND FUEL
TANK" section Page no 3-3
• Spark Plug
• Bolts (Cylinder Head Side Cover) ¿ 2 Nos
• Cylinder Head Side Cover À
• Valve Cover - Intake Á/ Exhaust side Â
• Timing Check Plug (with O-ring) ¿
• Center Plug (with O-ring) À
• Valve clearance (Intake and Exhaust) ¿
using Feeler Gauge
Out of specification Ÿ Adjust.
Feeler Gauge :
YSST - 615
Valve clearance (cold)
Intake : 0.08 ~ 0.12 mm
Exhaust : 0.10 ~ 0.14 mm