Engine; Idling Speed Adjustment; Throttle Cable Adjustment - Yamaha DT200L 1984-1988 Service Manual

IDLING SPEED ADJUSTMENT INSP
/THROTTLE CABLE ADJUSTMET ADJ
ENGINE
Idling Speed Adjustment
1. Remove:
• Rear shock absorber gas chamber
2. Tighten:
• Pilot air screw (lightly) (D
3. Loosen:
• Pilot air screw
Back it out from its lightly seated
position.
CD Pilot air screw
(2) Throttle stop screw
Standard Turned Out: 1 and 1/2
4. Start the engine, and let it warm up.
5. Adjust:
• Idling speed
Turn the throttle stop screw (2) to adjust.
^
Idling speed: 1, 350 r/min
6. Install:
• Rear shock absorber gas chamber
NOTE:
Insert the projection on the gas chamber into the
hole on the gas chamber bracket.
Throttle Cable Adjustment
NOTE:
Before adjusting the throttle cable free play, the
engine idling speed should be adjusted.
'^) Locknut
Adjuster
(a) Free play
2-2