FRONT WHEEL AND FRONT BRAKES
À
¿
REMOVAL
WARNING
À
¿
• Securely support the Motorcycle on the
centre stand so that there is no danger of
it falling over.
• Park the Motorcycle on a level surface
1. Loosen :
• Lock nut ¿ and screw in the adjuster À
fully to loosen the Brake Cable
2. Remove :
• Front Brake Cable Á by slacking and
removing it first from the Handlebar end
Á
and then from the Front Wheel end.
• Nut
• Spring
• Take out Brake wire from slot of Brake
Plate
3. Disconnect
• Speedometer Cable ¿ by removing the
clip À
¿
4. Remove
À
•
Cotter Pin ¿
•
Nut À
5. Lift
•
Front Wheel
NOTE :
Place suitable stand under the Engine.
5. Remove
• Front Wheel Axle ¿
• Brake Shoe Plate Assembly À
• Dust Seal/Collar Á
• Front Wheel Â
6-3
CHAS