Yamaha Fazer Service Manual page 115

ENGINE ASSEMBLY AND ADJUSTMENTS
ç
è
Á
Ã
Å
À
CRANKCASE LH
1. Apply :
Sealant
2. Install :
NOTE :
Do not allow any sealant to come in contact with
the Oil Galleries ç and è as shown in the fig-
ure.
3. Install:
NOTE :
Tighten the Engine Mounting Nuts-2 nos for
Ç
holding the Engine on the engine stand.
È
4. Tighten :
¿
5. Apply :
Â
6. Check :
Ä
Æ
Unsmooth operation Ÿ Reassemble/Repair
4-41
ENG
• Sealant on the Crankcase Mating surfaces
Yamaha bond No. 1215:
• Dowel Pins ¿
• Crankcase RH with the Crankcase LH. Tap
lightly on the Case with mallet.
• Bolts 2 nos Crankcase RH
• Bolts 8 nos Crankcase LH as per
sequence
Bolts (Crankcase) :
10 Nm (1.0 m.kg, 7.2 ft.lb)
• 4-Stroke Engine Oil on the Crank Pin,
Bearings and Oil Delivery Hole
• Crankshaft and transmission operation for
smooth rotation/ shifting by hand