IGNITION SYSTEM/ CHARGING SYSTEM
IGNITION SYSTEM, CHARGING SYSTEM AND TACHOMETER SYSTEM
CIRCUIT DIAGRAM
TROUBLE SHOOTING
IF THE IGNITION SYSTEM FAILS TO OPERATE.
PROCEDURE
CHECK
1. Spark Plug
2. Spark Plug Cap resistance
3. Ignition coil
4. Main switch
5. Sensor coil resistance
6. Charging Coil resistance
7. Rectifier cum Regulator Unit
8. Wiring connections (entire ignition system)
9. CDI
10.Tachometer Circuit
(NO SPARK OR INTERMITTENT SPARK)
7-4
Note :
Remove the required parts before trouble shooting.
1) Side covers (LH and RH)
2) Seat
3) Fuel Tank
• Use Service Instrument as specified.
Digital Multimeter
NOTE :
For Checking Coil resistance, set Multimeter a
step higher than specified range.
ELEC