Yamaha Fazer Service Manual page 175

¿
À
¿
New
¿
FRONT FORK
5. Tighten :
• Bolt (Cylinder Complete) ¿ holding the
Cylinder Complete with a T-Handle À
À
6. Install :
• Oil Seal ¿
Installation Tool À
NOTE :
• Before installing the Oil Seal ¿ apply lithium
soap base grease onto the Oil Seal lips.
• Adjust the Ring Snap so that it fits into the
Outer Tube Groove
CAUTION:
WARNING
Make sure that the Oil Seal numbered side
faces upward
7. Install :
• Washer ¿
Á
À
• Ring Snap À
• Dust Seal Á
8. Inspect :
• Inner Tube operation
Unsmooth operation Ÿ Disassembly and
recheck
6-25
CHAS
Bolt (Cylinder Complete) :
23 Nm (2.3 m.kg, 17 ft.lb)
T-Handle
YSST - 213
New Using TFF Oil Seal
TFF Oil Seal Installation Tool
YSST - 275