Authentication System - Xerox WorkCentre 7300 Series Administrator's Manual

Authentication System

To set Authentication System:
24. Click the Properties tab, click the Security folder, then click the Remote Authentication Servers
folder.
25. In the Remote Authentication Servers folder, click the Authentication System link.
26. On the Authentication System page, in the Authentication Type box:
a. In the Authentication System Settings drop-down list box, click or verify LDAP.
b. Click Apply, then reboot the device at the prompt.
Configure Color Copy Access Control at the device
To configure the device:
1. Press the Log In / Out button on the device Control Panel.
2. Press the "1" key on the numeric keypad five consecutive times. (This is the factory default
"password."). Touch Enter.
3. Press the Machine Status button on the Control Panel.
4. Touch the Tools tab.
5. Touch Authentication / Security Settings.
6. In the Group column, touch Authentication.
7. In the Features column, touch Access Control.
8. On the Access Control screen, touch Feature Access.
9. On the Feature Access screen:
a. In the Items column, touch Color Copying.
b. Touch the Change Settings button.
10. On the Color Copy screen, touch Locked, then touch Save.
11. Reboot the device.
12. On the All Services screen, touch the Copy icon, then the Color button.
The Login screen appears.
The device is configured for Color Copy Access for LDAP Group.
127