Support Tab; Additional Details Of Some Properties Tab Features; Setting Tiff (And Other Pdl) Processing Properties; Setting Pdl Emulations - Xerox WorkCentre 7300 Series Administrator's Manual

Support Tab

The Support tab provides a Software Upgrade hot link, and displays System Administrator and Xerox
Support information. By clicking on Change Settings, the displayed information can be modified as
desired.

Additional Details of some Properties Tab features

Setting TIFF (and other PDL) Processing Properties

To set the Printer's default TIFF / JPEG, PostScript, PCL, or HP-GL/2 processing properties, perform the
following steps:
1. Open your Web browser and enter the TCP/IP address of the Device in the Address or Location field.
Press Enter.
2. Click the Properties tab.
3. Click the folder in the directory tree labeled Services.
4. Click the folder labeled Printing, then on the folder labeled Language Emulations.
5. Click on the TIFF / JPEG, or PostScript, or PCL, or HP-GL/2 hot link to access the Device's list of
default settings for processing the selected Page Description Language.
6. Select a Printer number and click the Edit button (when available) to access a list of numerous
processing settings.
7. Click the rectangular Apply button to have the device register changes made to any settings. To
return settings to their previous values, without making changes, click the Undo button.

Setting PDL Emulations

To set the PDL (Page Description Language) Emulations, used by the Device's Input Ports, perform the
following steps:
1. Open your Web browser and enter the TCP/IP address of the Device in the Address or Location field.
Press Enter.
2. Click the Properties tab.
3. Click the folder in the directory tree labeled Services.
4. Click the folder labeled Printing.
5. Click on the folder labeled Language Emulations to see the Page Description Languages currently
supported by system software.
6. Click on the Print Mode hot link to access a list of the Device's Input Ports, displaying the Page
Description Language emulations they are currently set to use.
7. Depending upon the Ports enabled at the Device, the list of displayed Ports includes: Parallel,
AppleTalk (with PostScript), SMB, LPD, IPP, WSD, and Port 9100. Typical Page Description
selections for each Port include: Auto (auto select), PostScript, HP-GL/2, PCL and TIFF/JPEG.
8. Make your required setting changes, and click the rectangular Apply button to have the device register
the changes. To return settings to their previous values, without making changes, click the Undo
button.
167