Setup Menu Operations; Display; Frequency Input; Lcd Brightness - Yaesu FTM-500DR Advance Manual

Setup Menu Operations

1 FREQUENCY INPUT

In VFO mode, the screen for direct input of frequency is displayed, and in memory mode,
the screen for direct input of Memory Channel number is displayed. Select the [MEMORY
CH LIST] button on this screen and press FUNC knob to open the memory channel list
screen.
1. Press and hold the FUNC knob  [1 FREQUENCY INPUT]  Press the FUNC knob
2. Rotate the FUNC knob to select a number and press the FUNC knob to enter.
NOTE: This item is registered in the custom function menu by factory setting.

2 LCD BRIGHTNESS

The brightness of the display and key buttons can be changed.
1. Press and hold the FUNC knob  [2 LCD BRIGHTNESS]  Press the FUNC knob
2. Rotate the FUNC knob to select the brightness from the following 3 levels:
MIN / MID / MAX

3 FREQUENCY COLOR

The display color of the frequency of the operation band can be changed.
1. Press and hold the FUNC knob  [3 FREQUENCY COLOR]  Press the FUNC knob
2. Rotate the FUNC knob to select the display color:
WHITE / BLUE / RED

4 BAND SCOPE

Set the number of channels to be displayed when the BAND SCOPE function is used.
1. Press and hold the FUNC knob  [4 BAND SCOPE]  Press the FUNC knob
2. Rotate the FUNC knob to select the number of channels to search.
WIDE
NARROW
Refer to the Operating Manual for details.

5 LOCATION INFO

Set the display presentation on the smart navigation screen.
1. Press and hold the FUNC knob  [5 LOCATION INFO]  Press the FUNC knob
2. Rotate the FUNC knob to select what is displayed on the screen.
COMPASS
NUMERIC

DISPLAY

61 channels (VFO mode), 21 channels (Memory mode)
31 channels (VFO mode), 11 channels (Memory mode)
Displays the compass.
Displays the latitude and longitude.
45