Internet Connection Feature; To Access A Wires™ Repeater; To Access Other Internet Link Systems That Use A Dtmf String For Access - Yaesu FT-8900R Operating Manual

Internet Connection Feature

FT−8900R
The can be used to access a repeater which has been configured to provide access
to the Vertex Standard
other
Internet Link Systems
To access a WIRES™ repeater:
1. Press the left
INT ON message will be displayed for 2 seconds at the
appear in the memory channel field on the
2. Rotate the
the access number (
WIRES™
to the
repeater owner/operator if you don't know the access numbers in the network.
With the capability activated, the
WIRES™
tone according to your selection in step 2. This
transmission to establish or maintain the link to the remote
WIRES™
To disable the
To access other Internet Link Systems that use a DTMF
string for access:
1. Press the
2. Rotate the
3. Press the
use to establish an Internet link (ask your repeater owner/operator if you don't know
the access numbers in the network) into the desired
a. Rotate the
number (
b. Press the
c. Rotate the
knob momentarily to move the digit.
d. Repeat step c.
e. Press the
4. Rotate the
Yaesu FT-8900R Operating Manual Expanded Edition (courtesy of W5JCK)
WIRES™
(Wide-Coverage Internet Repeater Enhancement System) or
that use a
DTMF
knob momentarily to activate the
VOL
knob, while pressing and holding in the left
DIAL
ICOD 0 through
repeater to which you wish to establish an Internet link. Ask the
access capability, press the left
momentarily to enter the
SET key
knob to select
DIAL
knob momentarily, then load the
DIAL
knob to select the
DIAL
d-1 through d-16
knob momentarily.
DIAL
knob to select the
DIAL
knob momentarily to save the new setting.
DIAL
knob to select
DIAL
INTERNET CONNECTION FEATURE
string for access.
WIRES™
Main
band while
Sub
ICOD 9 , ICOD A through
FT−8900R
will generate a brief (0.1 second)
tone is sent at the beginning of every
DTMF
WIRES™
knob again.
VOL
mode.
Set
Menu #15 DTMF W .
DTMF
DTMF Memory
DTMF Autodialer
).
code, then press the
DTMF
Menu #17 INET .
access capability. The
band. The int icon will
WIRES™
access is enabled.
knob, to select
VOL
ICOD F ) corresponding
0.
repeater.
tones which you wish to
channel.
memory channel
Page 55 of 77
DTMF
DIAL