Icom IC-7700 Instruction Manual page 94

5
FUNCTIONS FOR RECEIVE
D D Scope set mode (continued)
(±
Select the sweep speed for the ±25 kHz span selec-
tion from SLOW, MID and FAST.
(±
Select the sweep speed for the ±50 kHz span selec-
tion from SLOW, MID and FAST.
(± 100k)
Select the sweep speed for the ±100 kHz span selec-
tion from SLOW, MID and FAST.
(± 250k)
Select the sweep speed for the ±250 kHz span selec-
tion from SLOW, MID and FAST.
Fixed Edges ( 0.03 –
Set the scope edge frequencies for fixed mode for
bands below 1.6 MHz.
( 1.60 –
Set the scope edge frequencies for fixed mode scope
when the 1.6 to 2 MHz band is selected.
( 2.00 –
Set the scope edge frequencies for fixed mode scope
when the 2 to 6 MHz band is selected.
( 6.00 –
Set the scope edge frequencies for fixed mode scope
when the 6 to 8 MHz band is selected.
25k)
50k)
1.60)
2.00)
6.00)
8.00)
FAST
FAST
FAST
FAST
0.750 –
• Set the frequencies within 0.030 to 1.600 MHz
range in 1 kHz steps.
As edge frequencies are set, the other edge fre-
quency will be automatically set for a display
band width of 5 kHz to a maximum of 500 kHz.
1.800 –
• Set the frequencies within 1.600 to 2.000 MHz
range in 1 kHz steps.
3.500 –
• Set the frequencies within 2.000 to 6.000 MHz
range in 1 kHz steps.
As edge frequencies are set, the other edge fre-
quency will be automatically set for a display
band width of 5 kHz to a maximum of 500 kHz.
7.000 –
• Set the frequencies within 6.000 to 8.000 MHz
range in 1 kHz steps.
As edge frequencies are set, the other edge fre-
quency will be automatically set for a display
band width of 5 kHz to a maximum of 500 kHz.
5-6
1.250 MHz
2.000 MHz
4.000 MHz
7.300 MHz