D Load Option Set Mode - Icom IC-7700 Instruction Manual

D D Load option set mode
Load Contents
Selects file load condition from All and Select.
(default: Select)
ANT Memory
Selects the antenna memory setting loading condition
from YES and NO. (default: NO).
REF IN/OUT, REF Adjust
Selects the reference signal setting load condition
from YES and NO. (default: NO).
IP Address, Subnet Mask
Selects the IP address and subnet mask setting load
condition from YES and NO. (default: NO).
CI–V Address
Selects the CI-V address setting load condition from
YES and NO. (default: NO).
Other Memory & Settings
This setting is fixed "YES."
Voice TX Memory
Selects the voice TX message load condition from
YES and NO. (default: YES).
Voice RX Memory
Selects the voice RX message load condition from
YES and NO. (default: NO).
Select
• All : Loads and sets the all following contents.
• Select : Loads and sets the selected contents only.
NO
• YES : Loads and sets the antenna memory.
• NO : Use the original antenna memory setting.
NO
• YES : Loads and sets the reference signal setting.
• NO : Use the original reference signal setting.
NO
• YES : Loads and sets the IP address and subnet
mask setting.
• NO : Use the original IP address and subnet
mask setting.
NO
• YES : Loads and sets the CI-V address setting.
• NO : Use the original CI-V address setting.
YES
• YES : Loads and sets memory channel contents
and other settings.
YES
• YES : Loads and sets voice TX message.
• NO : Use the original voice TX message.
NO
• YES : Loads and sets voice RX message.
• NO : Use the original voice RX message.
12-21
12
SET MODE