Memory Channels; Section 8 Memory Operation ■ Memory Channels; Memory Channel Selection - Icom IC-7700 Instruction Manual

8
MEMORY OPERATION

■ Memory channels

MEMORY
CHANNEL
Regular memory
channels
Scan edge
memory
channels

■ Memory channel selection

D D Using the
/
∫
D D Using the keypad
MEMORY
CHANNEL
NUMBER
Independent
receive frequencies and modes
1–99
in each memory channel.
One frequency and one mode in
P1, P2 each memory channel as scan
edges for programmed scan.
keys
√
Y Z
V/M
Keypad
F-IMP
Y Z
V/M
The transceiver has 101 memory channels. Memory
mode is very useful for quickly changing to often-used
frequencies.
All 101 memory channels are tuneable which means
the programmed frequency can be tuned temporarily
with the main dial, etc. in memory mode.
CAPABILITY
transmit and
q Push
w Push
sired memory channel.
• Push and hold
• [UP] and [DN] on the microphone can also be used.
e To return to VFO mode, push
q Push
ENT
w Push
F-INP
e Push the desired memory channel number using the
keypad.
• Enter 100 or 101 to select scan edge channel P1 or P2,
respectively.
r Push
channel.
[EXAMPLE]
To select the memory channel 3;
- Push F-INP
To select the memory channel 12;
- Push F-INP
.
√
To select the scan edge channel P1;
- Push
F-INP
or
∫
To select the scan edge channel P2;
- Push
F-INP
or
∫
8-2
TRANSFER OVER-
TO VFO WRITING
Yes Yes
Yes Yes
to select memory mode.
V/M
/ several times to select the de-
∫
√
/ for continuous selection.
∫
√
to select memory mode.
V/M
.
ENT
or to select the desired memory
∫
√
, , then push
7
3
ENT
, ,
1.8 3.5
1 2
ENT
, ,
1.8 50
1 0
ENT
.
√
, ,
1.8 50
1 0
ENT
.
√
CLEAR
Yes
No
again.
V/M
or .
∫
√
, then push or
∫
, , then push
50
0
, , then push
1.8
1