D Meter Type Selection; Voice Synthesizer Operation - Icom IC-7700 Instruction Manual

D D Meter type selection
∫ √
F-1 F-2
• Edgewise meter
1 3 5 7
S
Po
0 50 100
• Bar meter
1 3 5
S
Po
0 10 50

■ Voice synthesizer operation

EXIT/SET
DISP SET
F-3 F-7
+ 20 + 40 + 60dB
9
150 200 250W
7 9 + 20 + 40 + 60dB
100 150 200 250W
SPEECH
A total of 3 meter types are available in the IC-7700—
Standard, Edgewise and Bar meters.
Follow the instructions below for the meter type selec-
tion.
q Push
EXIT/SET
screen, if necessary.
w Push [SET]
F-7
display set mode.
e Push [Y]
F-1
(Normal Screen)" item.
r Rotate the main dial to select the desired meter type
from "Standard," "Edgewise" and "Bar."
t Push
EXIT/SET
The IC-7700 has a built-in voice synthesizer to an-
nounce the frequency, mode, etc. (S-meter level can
also be announced—p. 12-15) in clear, electroni-
cally-generated voice, in English (or Japanese).
➥ Push
SPEECH
lected frequency, etc.
• Push and hold
nounce the selected mode.
➥ Pushing a mode switch also announces the ap-
propriate mode. (p. 12-15)
The output level of the voice synthesizer can be
adjusted in level set mode. (p. 12-6)
3-11
BASIC OPERATIONS
several times to return to normal
, then push [DISP]
F-3
or [Z] to select "Meter type
F-2
to exit display set mode.
to announce the currently se-
for 1 sec. to additionally an-
SPEECH
3
to select