Functions For Transmit; Vox Function; Section 6 Functions For Transmit ■ Vox Function; D Using The Vox Function - Icom IC-7700 Instruction Manual

6

FUNCTIONS FOR TRANSMIT

■ VOX function

D D Using the VOX function
VOX
SSB AM/FM
D D Adjusting the VOX function
VOX SSB
[VOX GAIN]
D D VOX set mode
VOX Delay
Set the VOX delay for a convenient interval before re-
turning to receive within 0 to 2.0 sec. range.
VOX Voice Delay
Set the VOX voice delay to prevent from clipping the
first few syllables of a transmission when switching to
transmit.
Short, Mid., Long and OFF settings are available.
AM/FM
[ANTI VOX]
The VOX (Voice-Operated Transmission) function
switches between transmit and receive with your voice.
This function provides "hands-free" operation.
q Select a phone mode (SSB, AM, FM).
w Push
to turn the VOX function ON or OFF.
VOX
• " " appears while the VOX is in use.
VOX
• [VOX] indicator above this switch lights green.
q Select a phone mode (SSB, AM, FM).
w Push
to turn VOX function ON.
VOX
e While speaking into the microphone with your nor-
mal voice level, rotate [VOX GAIN] to the point
where the transceiver is continuously transmitting.
r During receive, rotate [ANTI VOX] to the point
where the transceiver does not switch to transmit
due to received audio from the speaker.
t Adjust the VOX delay and the VOX voice delay in
VOX set mode, if necessary.
q Push and hold
mode.
w Select the desired item using [Y]
e Rotate the main dial to the desired set value or con-
dition.
• Push and hold [DEF]
value.
r Push
to exit VOX set mode.
EXIT/SET
OFF
When using the VOX voice delay, turn the TX mon-
itor function OFF to prevent transmitted audio from
be echoed.
6-2
for 1 sec. to enter VOX set
VOX
or [Z]
F-1
F-4 for 1 sec. to select a default
0.2s
.
F-2