D Rtty Decode Set Mode - Icom IC-7700 Instruction Manual

4
RECEIVE AND TRANSMIT
D D RTTY decode set mode
Ω ≈
F-3
∫ √
F-1 F-2
• RTTY decode set mode screen
RTTY FFT Scope Averaging
Select the FFT scope waveform averaging function
from 2 to 4 and OFF. (default: OFF)
RTTY FFT Scope Waveform Color
Set the color for the FFT scope waveform.
• The color is set in RGB format.
• The set color is indicated in the box beside the RGB scale.
RTTY Decode USOS
Turn the capability of letter code decoding after re-
ceiving a "space" (USOS; UnShift On Space function)
ON and OFF.
RTTY Decode New Line Code
Selects the new line code of the internal RTTY de-
coder.
CR: Carriage Return, LF: Line Feed
RTTY Diddle
Selects the diddle condition.
WIDE
F-7
Main dial
EXIT/SET
DEF
F-4
This set mode is used to set the decode USOS func-
tion, time stamp setting, etc.
• Setting contents
q During RTTY mode operation, push [DECODE]
to select RTTY decode screen.
F-3
w Push [<MENU1>]
decode menu, then push [SET]
RTTY decode set mode.
• Push [WIDE] F-7
and wide.
e Push [Y]
F-1
item.
r Set the desired condition using the main dial.
• Push and hold [DEF]
condition or value.
• Push [Ω ≈] F-3
items.
t Push
EXIT/SET
OFF
Recommendation!
If you use the FFT scope waveform for tuning, use of
the default or smaller averaging setting is recom-
mended.
• Push [Ω ≈] F-3 to select R (Red), G (Green) and B (Blue),
and then rotate the main dial to set the ratio from 0 to 255.
ON
• ON : Decode as letter code.
• OFF : Decode as character code.
CR,LF,CR+LF
• CR,LF,CR+LF : Makes new line with any codes.
• CR+LF : Makes new line with CR+LF code
only.
BLANK
• BLANK : Transmits blank code during no code
transmission.
• LTRS : Transmits letter code during no code
transmission.
• OFF : Turns the diddle function OFF.
4-18
to select the second RTTY
F-1
F-6
to toggle the screen size from normal
or [Z] to select the desired set
F-2
F-4 for 1 sec. to select a default
to select the set contents for some
to exit from set mode.
51 153
to select
255