Memory List Screen; D Selecting A Memory Channel Using The Memory List Screen; D Confirming Programmed Memory Channels - Icom IC-7700 Instruction Manual

■ Memory list screen

D D Selecting a memory channel using the memory list screen
ROLL MEMORY
F-1 F-4

• Memory list screen

D D Confirming programmed memory channels
ROLL SET
F-1
Z Y
Main dial
WIDE EXIT/SET
F-7
EXIT/SET Main dial
F-2
The memory list screen simultaneously shows 9 mem-
ory channels and their programmed contents. 15 mem-
ory channels can be displayed in the wide memory list
screen.
You can select a desired memory channel from the
memory list screen.
q Push
several times to close a multi-func-
EXIT/SET
tion screen, if necessary.
w Push [MEMORY]
• [WIDE] switches the standard and wide screens.
F-7
e While pushing and holding [ROLL]
main dial to select the desired memory channel.
• and can also be used.
∫
√
r Push
to exit memory list screen.
EXIT/SET
q Select memory list screen as described above.
w While pushing [ROLL]
scroll the screen.
e Push [SET]
F-2
channel, if desired.
• "≈" appears beside the selected memory channel num-
ber in the memory list screen and the selected memory
channel contents are displayed below the frequency
readout.
r Push
to exit memory list screen.
EXIT/SET
8-5
MEMORY OPERATION
to select memory list screen.
F-4
, rotate the
F-1
, rotate the main dial to
F-1
to select the highlighted memory
8