Power Connector Cable - HP Pavilion 11 x2 PC Maintenance And Service Manual

Reverse this procedure to install the HDMI/USB board.

Power connector cable

Description
Power connector cable
Before removing the power connector cable, follow these steps:
1. Turn off the tablet and keyboard base. If you are unsure whether the tablet and keyboard base
are off or in Hibernation, turn the tablet on, and then shut it down through the operating system.
2. Disconnect the power from the tablet and keyboard base by unplugging the power cord from the
tablet and keyboard base.
3. Disconnect the tablet from the keyboard base.
4. Remove the bottom cover (see
5. Disconnect the keyboard base battery cable from the docking board (see
on page
Remove the power connector cable:
1. Disconnect the power connector cable (1) from the docking board.
2. Remove the Phillips PM1.50×2.25 screw (2) that secures the power connector to the keyboard/
top cover.
68 Chapter 5 Removal and replacement procedures
Bottom cover on page
62).
Spare part number
740188-001
61).
Keyboard base battery