HP Pavilion 11 x2 PC Maintenance And Service Manual page 63

Description
System board equipped with an Intel Celeron N2920 1.86-GHz (SC turbo up to 2.00-GHz)
processor (1066-MHz FSB, 2.0-MB L2 cache, quad core, 4.5 W) , 4-GB of system memory, and
the Windows 8 Standard operating system
System board equipped with an Intel Celeron N2920 1.86-GHz (SC turbo up to 2.00-GHz)
processor (1066-MHz FSB, 2.0-MB L2 cache, quad core, 4.5 W) , 4-GB of system memory, and
the Windows 8 Professional operating system
System board equipped with an Intel Celeron N2920 1.86-GHz (SC turbo up to 2.00-GHz)
processor (1066-MHz FSB, 2.0-MB L2 cache, quad core, 4.5 W) , 2-GB of system memory, and
the FreeDOS or Linux operating system
System board equipped with an Intel Celeron N2920 1.86-GHz (SC turbo up to 2.00-GHz)
processor (1066-MHz FSB, 2.0-MB L2 cache, quad core, 4.5 W) , 2-GB of system memory, and
the Windows 8 Standard operating system
System board equipped with an Intel Celeron N2920 1.86-GHz (SC turbo up to 2.00-GHz)
processor (1066-MHz FSB, 2.0-MB L2 cache, quad core, 4.5 W) , 2-GB of system memory, and
the Windows 8 Professional operating system
Before removing the system board, follow these steps:
1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2. Disconnect the power from the tablet by unplugging the power cord from the tablet.
3. Disconnect all external devices from the tablet.
4. Remove the display enclosure (see
5. Disconnect the tablet battery cable from the system board (see
then remove the following components:
a. WLAN module (see
b. Solid-state drive (see
c. Heat sink (see
d. Power connector board (see
Display enclosure on page
WLAN module on page
Solid-state drive on page
Heat sink on page 46)
Power connector board on page
31).
Sensor board on page
38)
44)
53)
Tablet component replacement procedures
Spare part number
754648–501
754648–601
754649–001
754649–501
754649–601
32), and
55