Table of Contents
Advertisement
Power connector and cable
Description
Power connector and cable
Before removing the power cable, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and
then unplugging the AC adapter from the computer.
4.
Remove the following components:
a.
Service door
b.
Hard drive
c.
Keyboard
d.
Top cover
e.
Card reader board
f.
Battery
g.
Display assembly right hinge
Remove the power cable:
▲
Rotate the bottom of the power cable upward to remove it from the computer.
Reverse this procedure to install the power cable.
72
Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
(Service doors on page
(Hard drive on page
38)
(Keyboard on page
41)
(Top cover on page
45)
(Card reader board on page
(Battery on page
60)
(Display assembly on page
32).
59)
67)
Spare part number
L01952-001
Advertisement
Table of Contents
