Hdmi/Usb Board - HP Pavilion 11 x2 PC Maintenance And Service Manual

HDMI/USB board

Description
HDMI/USB board (includes HDMI port and USB 3.0 port)
Before removing the HDMI/USB board, follow these steps:
1. Turn off the tablet and keyboard base. If you are unsure whether the tablet and keyboard base
are off or in Hibernation, turn the tablet on, and then shut it down through the operating system.
2. Disconnect the power from the tablet and keyboard base by unplugging the power cord from the
tablet and keyboard base.
3. Disconnect the tablet from the keyboard base.
4. Remove the bottom cover (see
5. Disconnect the keyboard base battery cable from the docking board (see
on page
Remove the HDMI/USB board:
1. Release the ZIF connector (1) to which the card reader board cable is attached, and then
disconnect the card reader board cable from the HDMI/USB board.
2. Disconnect the hinge assembly "HDMI side" cable (2) from the HDMI/USB board.
3. Remove the two Phillips PM1.85×3.00 screws (3) that secure the HDMI/USB board to the
keyboard/top cover.
4. Remove the HDMI/USB board (4).
62).
Bottom cover on page
Keyboard base component replacement procedures
Spare part number
740209-001
61).
Keyboard base battery
67