Display Panel Cable - HP Pavilion 11 x2 PC Maintenance And Service Manual

4. Remove the system board (2).
Reverse this procedure to install the system board.

Display panel cable

Description
Display panel cable (includes adhesive support strips)
Before removing the display panel cable, follow these steps:
1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2. Disconnect the power from the tablet by unplugging the power cord from the tablet.
3. Disconnect all external devices from the tablet.
4. Remove the display enclosure (see
5. Disconnect the tablet battery cable from the system board (see
6. Remove the bezel (see
7. Remove the system board (see
Remove the display panel cable:
1. Release the adhesive support strip (1) that secures the display panel cable to the display
panel assembly.
58 Chapter 5 Removal and replacement procedures
Display enclosure on page
Bezel on page 50).
System board on page
Spare part number
740197-001
31).
Sensor board on page
54).
32).