Volume Button Board - HP Pavilion 11 x2 PC Maintenance And Service Manual

Volume button board

Description
Volume button board (includes cable and double-sided adhesive)
Before removing the volume button board, follow these steps:
1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2. Disconnect the power from the tablet by unplugging the power cord from the tablet.
3. Disconnect all external devices from the tablet.
4. Remove the display enclosure (see
5. Disconnect the tablet battery cable from the system board (see
Remove the volume button board:
1. Release the ZIF connector (1) to which the volume button board cable is attached, and then
disconnect the volume button board cable from the TouchScreen board.
2. Detach the volume button board (2) from the display panel assembly. (The power button board
is attached to the display panel assembly with double-sided tape.)
3. Remove the volume button board and cable.
Reverse this procedure to install the volume button board.
Display enclosure on page
Tablet component replacement procedures
Spare part number
742732-001
31).
Sensor board on page 32).
41