Table of Contents
Advertisement
Power connector cable
Description
Power connector cable
Before removing the power connector cable, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the top cover (see
5.
Disconnect the battery.
6.
Remove the display (see
Remove the power connector cable:
1.
Disconnect the power connector cable (1) from the system board.
Top cover on page
28).
Display assembly on page
53).
Component replacement procedures
Spare part number
768012-001
59
Advertisement
Table of Contents
