Sensor Board - HP Pavilion 11 x2 PC Maintenance And Service Manual

3. Remove the display enclosure (2) from the tablet.
4. Remove the display enclosure.
Reverse this procedure to install the display enclosure.

Sensor board

Description
Sensor board (includes cable, double-sided adhesive, and microphone)
Before removing the sensor board, follow these steps:
1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2. Disconnect the power from the tablet by unplugging the power cord from the tablet.
3. Disconnect all external devices from the tablet.
4. Remove the display enclosure (see
32 Chapter 5 Removal and replacement procedures
Display enclosure on page
Spare part number
742731-001
31).