Keyboard Base Component Replacement Procedures; Bottom Cover - HP Pavilion 11 x2 PC Maintenance And Service Manual

Keyboard base component replacement procedures

CAUTION:
an authorized service provider. Accessing these parts can damage the keyboard base and void
the warranty.
This chapter provides removal and replacement procedures for authorized service provider only
parts.
There are as many as 31 screws that must be removed, replaced, and/or loosened when servicing
the keyboard base. Make special note of each screw size and location during removal
and replacement.

Bottom cover

NOTE: The bottom cover includes rubber padding, shielding, and 5 rubber feet. The five rubber feet
are included in the Rubber Feet Kit, spare part number 740207-001.
Description
In flyer red finish
In flyer red finish
In pearl red finish
In sparkling black finish
In sparkling black finish
Before disassembling the keyboard base, follow these steps:
1. Turn off the tablet and keyboard base. If you are unsure whether the tablet and keyboard base
are off or in Hibernation, turn the tablet on, and then shut it down through the operating system.
2. Disconnect the power from the tablet and keyboard base by unplugging the power cord from the
tablet and keyboard base.
3. Disconnect the tablet from the keyboard base.
Remove the bottom cover:
1. Remove the front (1) and rear rubber feet (2).
NOTE:
Rubber Feet Kit, spare part number 740207-001.
2. Remove the six Phillips PM1.85×5.50 screws (3) and the two Phillips PM1.85×4.80 screws (4)
that secure the bottom cover to the keyboard/top cover.
Keyboard base components described in this chapter should only be accessed by
The front and rear rubber feet are different shaped and sized and are available in the
Keyboard base component replacement procedures
Spare part number
740195-001
757225–001
740196-001
740185-001
757224–001
61