Table of Contents
Advertisement
Power connector cable (DC-in)
Table 6-16
Spare part description and number
Description
Power connector cable
Before removing the power connector cable, follow these steps:
1.
Prepare the computer for disassembly
2.
Remove the optical drive (see
3.
Remove the bottom cover (see
4.
Remove the battery (see
5.
Remove the system board (see
6.
Remove the display (see
Remove the power connector cable:
1.
Remove the cable from the clips built into the computer (1).
2.
Remove the power connector cable from the computer (2).
Reverse this procedure to install the power connector cable.
(Preparation for disassembly on page
Optical drive on page
Bottom cover on page
Battery on page
34).
System board on page
Display assembly on page
29).
32).
63).
54).
Component replacement procedures
Spare part number
L20475-001
28).
67
Advertisement
Table of Contents
