Card Reader Board - HP Pavilion 11 x2 PC Maintenance And Service Manual

4. Remove the TouchPad (4) by pressing it through the keyboard/top cover.
NOTE:
the opening (5) in the keyboard/top cover.
Reverse this procedure to install the TouchPad.

Card reader board

Description
Card reader board (includes cable)
Before removing the card reader board, follow these steps:
1. Turn off the tablet and keyboard base. If you are unsure whether the tablet and keyboard base
are off or in Hibernation, turn the tablet on, and then shut it down through the operating system.
2. Disconnect the power from the tablet and keyboard base by unplugging the power cord from the
tablet and keyboard base.
3. Disconnect the tablet from the keyboard base.
4. Remove the bottom cover (see
5. Disconnect the keyboard base battery cable from the docking board (see
on page
When removing the TouchPad, make sure the TouchPad cable routes cleanly through
62).
Bottom cover on page
Keyboard base component replacement procedures
Spare part number
740202-001
61).
Keyboard base battery
65