Omron EasySpeed 3G3JE User Manual page 22

Overview
Digital Operator Part Names
■
Name
Data display
888
Hz set Frequency ref-
@
erence
Hz out Output fre-
@
quency
A Output current Lit when the data display shows the output current.
@
Kh Accumulated
@
operating time
RUN RUN indicator Lit while the Inverter is operating.
@
RVS Reverse oper-
@
ation indicator
ALM Alarm indica-
@
tor
COM Communica-
@
tions indicator
Mode Key
Enter Key
RUN Key
RUN
STOP/RESET
STOP
Key
RESET
Increment Key These keys change the displayed set value. They also change the parameter
Decrement
Key
Note Refer to Section 3 Operation for information on moving between modes.
1-4
Displays relevant data, such as the frequency reference, output frequency, out-
put current, parameter set values, and accumulated operating time.
Lit when the data display shows the frequency reference.
Lit when the data display shows the output frequency.
Lit when the data display shows the accumulated operating time.
Lit while the Inverter is operating in reverse.
Lit when a fault is detected or a protective function has been triggered. (Error
information can be monitored in RUN mode.)
Lit while data is being sent or received. (Communications models only.)
In RUN mode, switches the setting/monitoring indicators. When pressed for one
second or longer, the mode changes from the RUN mode to the initial settings
mode.
Enters displayed items, set values, etc.
When this key is pressed for one second or longer, the mode is changed from
RUN mode to adjustment mode.
Starts the Inverter if operation with the Digital Operator is selected.
Stops the Inverter.
This key also clears errors when errors are detected or a protection function
operates.
Operating with the Digital Operator must be selected to use the above key func-
tions.
set in the adjustment mode or initial settings mode.
Function
Chapter 1