Table of Contents
Advertisement
Parameter Tables
RUN Mode
■
Name
Indicator
@ Hz set
Frequency refer-
ence
Output fre-
@ Hz out
quency
@ A
Output current
Accumulated
@ Kh
operating time
Forward/reverse
@ RVS
operation selec-
(Lit during
tion
reverse
operation.)
• The frequency reference can be set between the frequency reference upper limit (P07) and fre-
quency reference lower limit (P08).
• Even if reverse operation is selected, forward operation will be returned to when the power is turned
OFF and ON or initial settings mode is entered.
■
Adjustment Mode
Name
Data
display
Frequency
reference 1
Frequency
reference 2
Frequency
reference 3
Frequency
reference 4
Acceleration time
Deceleration time
Application selec-
tion
• Set values for SP1 to SP4, ACC, and DEC are changed in increments of 0.1 up to 99.9. From 100
and up they are changed in increments of 1.0.
Data display
The frequency reference is dis-
played.
The output frequency is displayed.
The output current is displayed.
The accumulated operating time is
displayed.
The direction of rotation is dis-
played.
Description
Used to set internal fre-
sp1
quency references.
Note: Enabled when
sp2
"MSP" is selected
for P11 (Frequency
sp3
reference selection).
sp4
The acceleration time is
the time required to accel-
erate from 0% to 100% of
acc
the maximum output fre-
quency. (See note.)
The deceleration time is
the time required to decel-
dec
erate from 100% to 0% of
the maximum output fre-
quency. (See note.)
Sets the V/f pattern as the
basic characteristic
according to the applica-
tion to be used.
lod
CNV: Conveyer applica-
tions
FAN: Fan or pump applica-
tions
Setting
Default
setting
range
0.0 to 120
10.0
None
---
None
---
None
---
FWD (fwd)
FWD
REV (rev)
Setting range
Default
setting
0.0 to 120
10.0
0.0
0.0
0.0
0.1 to 999
10.0
0.1 to 999
10.0
CNV (cnv)
CNV
FAN (fan)
Chapter 6
Unit
Refer-
ence
Hz
3-10
Hz
3-10
A
3-10
Kh
3-10
None
3-10
Unit
Refer-
ence
Hz
3-12
Hz
3-12
Hz
3-12
Hz
3-12
s
3-13
s
3-13
None
3-15
6-3
Advertisement
Table of Contents
