Create Raid Volume - Foxconn Rattler User Manual

Create RAID Volume

Create RAID 0 (1st Volume)
1. Select "1. Create RAID Volume" from the menu and press <Enter>.
The menu appears :
Intel(R) Matrix Storage Manager option ROM v5.0.0.1011 ICH9R wRAID5
2. In "Name" item, you can input a device name for the RAID0 system and press <Enter>
to apply it. Here, we name it as TryRAID0 to replace the default Volume0.
3. In "RAID Level" item, you can use Up or Down arrow key to make a selection. Select
RAID0 (Stripe) and press <Enter>.
Intel(R) Matrix Storage Manager option ROM v5.0.0.1011 ICH9R wRAID5
Intel(R) Rapid Storage Technology - Option ROM - 10.0.0.1032
Copyright(C) 2003-10 Intel Corporation. All Rights Reserved.
Copyright(C) 2003-04 Intel Corporation All Rights Reserved.
[ CREATE VOLUME MENU
Name:
RAID Level:
Disks:
Strip Size:
Capacity:
Sync:
Enter a unique volume name that has no special characters and is
16 characters or less.
[↑↓]-Change [TAB]-Next
Intel(R) Rapid Storage Technology - Option ROM - 10.0.0.1032
Copyright(C) 2003-10 Intel Corporation. All Rights Reserved.
Copyright(C) 2003-04 Intel Corporation All Rights Reserved.
[ CREATE VOLUME MENU
Name:
RAID Level:
Disks:
Strip Size:
Capacity:
Sync:
RAID 0: Stripes data (performance).
[↑↓]-Change [TAB]-Next
]
Volume0 Volume0
RAID0(Stripe)
Select Disks
128KB
0.0 GB
N/A
Create Volume
[ HELP ]
[ESC]-Previous Menu
]
TryRAID0
RAID0(Stripe)
RAID0(Stripe)
Select Disks
128KB
0.0 GB
N/A
Create Volume
[ HELP ]
[ESC]-Previous Menu
67
[ENTER]-Select
[ENTER]-Select