Exit Raid Bios - Foxconn Quantumian1 User Manual

exit RAID bIoS

1. Take TryRAID5 as an example, select "5. exit" in main menu and press <Enter>.
The screen displays :
Intel(R) Rapid Storage Technology enterprise - SATA Option ROM - 3.0.0.1184
1. Create RAID Volume
2. Delete RAID Volume
RAID Volume :
ID Name
0 0 TryRAID5 TryRAID5
Physical Disks:
Port Drive Model
0 Hitachi HDS72161 Hitachi HDS72161
1 ST380811AS
SAMSUNG HD161HJ S0V3J9APA30524
2
ST380815AS
3
2. Press <Y> to exit Intel
will enter BIOS setup.
3. Shut down the computer, remove the Non-RAID disk, and we will continue for
Windows OS installation. If you do not remove irrelevant hard disk, Windows may
detect it during the installation, and you could be confused.
4. Remove any diskette from floppy drive.
5. Restart computer to start Windows installation.
Copyright(C) 2003-11 Intel Corporation. All Rights Reserved.
[ MAIN MENU
[ DISK/VOLUME INFORMATION
Level
RAID5(Parity) RAID5(Parity)
[ CONFIRM EXIT
Are you sure you want to exit? (Y/N): Serial #
PVF904�21G2J�M PVF904�21G2J�M PVF904�21G2J�M
5PS1TAGW
S0V3J9APA30524
5RW1CA37
[↑↓]-Select [ESC]-Exit
®
Rapid Storage Technology enterprise program. The system
]
3. Reset Disks to Non-RAID
4. Recover Volume Options
5. Exit
]
Stripe Size Status
64KB 149.1GB 64KB 149.1GB
Normal
]
Size Type/Status(Vol ID)
149.0GB 149.0GB 149.0GB
Member Disk(0)
74.5GB
Member Disk(0)
149.0GB 149.0GB 149.0GB
Member Disk(0)
74.5GB
Non-RAID Disk
[ENTER]-Select Menu
91
Bootable
Yes