Cumulative Operation Time Alarm Setting - Toshiba TOSVERT VF-S11 Instruction Manual

<Example of operation>
1) Output terminal function: 12 (OT) Over-torque detection
Over-torque
signal output
Torque current (%)
6
2) Output terminal function: 20 (POT) Over-torque detection pre-alarm
Over-torque pre-alarm
Signal output

6.19.10 Cumulative operation time alarm setting

= (Alarm only)
－
When = (tripping), the inverter will trip if over-torque lasts for the period of time set with
. In such a case, the over-torque signal remains ON.
× 0.7
× 0.7−
Torque current
(%)
: Cumulative operation time alarm setting
less than
OFF ON OFF
F-68
E6581158
OFF
ON
OFF
Time [sec]
ON
Time [sec]