Setting Frequency Command Characteristics - Toshiba TOSVERT VF-S11 Instruction Manual

6.5.2

Setting frequency command characteristics

: VIA input point 1 setting
: VIA input point 1 frequency
: VIA input point 2 setting
: VIA input point 2 frequency
: VIB input point 1 setting
: VIB input point 1 frequency
: VIB input point 2 setting
: VIB input point 2 frequency
: Communication command point 1 setting
: Communication command point 1 frequency
: Communication command point 2 setting
: Communication command point 2 frequency
• Function
These parameters adjust the output frequency according to the externally applied analog signal (0-
10Vdc voltage, 4-20mAdc current) and the entered command for setting an external contact
frequency.
To fine adjust the frequency command characteristics for VIA/VIB input, use the parameters f470 to
✩ ✩ ✩ ✩
f473. (See section 6.5.4.)
F-19
E6581158
6