Toshiba TOSVERT VF-S11 Instruction Manual page 108

(3) The logical product (AND) or logical sum (OR) of the two functions assigned is put
out as a signal.
Setting of output terminal function
Terminal
symbol
RY-RC
OUT-NO
FL (A,B,C)
RY-RC
OUT-NO
RY-RC/
OUT-NO
6
Two different functions can be assigned to the output terminals (RY-RC and OUT-NO), and two logics with
different functions can be selected using
The logical product (AND) or logical sum (OR) of the two functions assigned is put out as a signal, depending
on the setting of parameter
If
If
If
If
To assign only one function to output terminals, assign the function to
✩ ✩ ✩ ✩
f137 to f139 as they are set by default.
Note: f138 (OUT-NO): Enable only when f669=0
(4) Holding the output of signals in ON status
If the conditions for activating the functions assigned to output terminals RY-RC and OUT-NO agree with
✩ ✩ ✩ ✩
and as a result the output of signals is put in ON status, the output of signals is held ON, even if the
conditions change. (Output terminal holding function)
Assign input terminal function 62 or 63 to a contact input terminal available.
✩ ✩ ✩ ✩
Title Function
Output terminal selection 1A
Output terminal selection 2A
Output terminal selection 3
Output terminal selection 1B
Output terminal selection 2B
Output terminal logic selection
.
= , the logical sum (AND) of
The logical product (OR) of
= , the logical product (OR) of
The logical sum (AND) of
= , the logical sum (AND) of
The logical product (OR) of
= , the logical product (OR) of
The logical product (OR) of
Disabled and the set value cannot be read out, if f669 is set to 1.
Adjustment range
0-255
(See Section 11)
0 :
1 :
2 :
3 :
.
and will be output to RY-RC.
and will be output to OUT-NO.
and will be output to RY-RC.
and will be output to OUT-NO.
and will be output to RY-RC.
and will be output to OUT-NO.
and will be output to RY-RC.
and will be output to OUT-NO.
F-14
E6581158
Default setting
4 (Low-speed
detection signal)
6 (Designated
frequency reach)
10 (Failure FL)
255 (Always
active)
255 (Always
active)
and
and
or
and
0
and
or
or
or
and while leaving