Industrial Inverter - Toshiba TOSVERT VF-S11 Instruction Manual

II. Introduction
Thank you for your purchase of the Toshiba "TOSVERT VF-S11" industrial inverter.
This is the Ver.108 / Ver.109 CPU version inverter.
Please be informed that CPU version will be frequently upgraded.
Features
1. Built-in noise filter
1) All models in both the 240V and 500V series have a noise filter inside. (Except 600V series)
2) Can be compliant with European CE marking standard
3) Reduces space requirements and cuts down on time and labor needed in wiring.
2. Simple operation
1) Automatic functions (torque boost acceleration/deceleration time, function programming)
Just by wiring the motor to the power supply allows instant operation without the need to program
parameters.
2) The potentiometer dial and the RUN/STOP button allow easy operation.
3. Superior basic performance
1) 200% or more starting torque
2) Smooth operation : Reduced rotation ripple through the use of Toshiba's unique waveform formation.
3) Built-in current surge suppression circuit : Can be safely connected even if power load is low.
4) Maximum 500Hz high frequency output : Optimum for use with high speed motors such as those in
5) Maximum carrier frequency : 16kHz quiet operation
Toshiba's unique PWM control reduces noise at low carrier.
4. Globally compatible
1) Compatible with 240V, 500V and 600V power supplies
2) Conforms to CE marking and with UL, CSA.
3) Sink/source switching of control input/output.
5. Options allow use with a wide variety of applications
• Internal communications devices (RS485, Modbus RTU, DeviceNET, LonWorks etc.)
• Extension panel/Parameter writer
• DIN rail kit
• EMC noise reduction filter (Foot mount and side mount installation)
• Other options are common to all models
6. Extended power range
• Wide range of powers up to 15kW for this class of inverter.
• Totally enclosed box type.
lumber machinery and milling machines.
7
E6581158
II