Toshiba TOSVERT VF-S11 Instruction Manual page 106

(1) A signal is sent out when the two functions assigned are activated simultaneously.
Terminal
symbol
RY-RC
OUT-NO
RY-RC
OUT-NO
Two different functions can be assigned to terminals RY-RC and terminals OUT-NO.
✩ ✩ ✩ ✩
If parameter
✩ ✩ ✩ ✩
activated simultaneously.
Terminals RY-RC: Send out a signal when the functions assigned with
simultaneously.
Terminals OUT-NO: Send out a signal when the functions assigned with
simultaneously.
6
Timing chart
✩ ✩ ✩ ✩
RY-RC output
(OUT-NO)
Only one function can be assigned to terminals FLA-FLB-FLC at a time.
✩ ✩ ✩ ✩
Title
Output terminal selection 1A
Output terminal selection 2A
Output terminal selection 1B
Output terminal selection 2B
is set to 0 (default), a signal will be sent out when the two functions assigned are
ON
(F137) OFF
ON
OFF
(F138)
ON
OFF
Function
Adjustment range
(See section 11.)
F-12
E6581158
Default setting
4 (Low-speed
detection signal)
6 (Designated
0-255
frequency reach)
255 (Always ON)
and are activated
and are activated