Simplified Operation Of The Vf-S11 - Toshiba TOSVERT VF-S11 Instruction Manual

3.1

Simplified Operation of the VF-S11

The procedures for setting operation frequency and the methods of operation can be selected from the following.
Setting the frequency
3
Use the basic parameters
Title
* See 5.4 for
: (1) Start and stop using the operation panel keys
Start / Stop
: (1) Setting using the potentiometer on the inverter
(Speed setting mode selection).
Function
Command mode selection
Frequency setting mode
=4, 5 and 6.
(2) Run and stop from the operation panel
main unit
(2) Setting using the operation panel
(3) Setting using external signals to the terminal board
(0-10Vdc, 4-20mAdc)
(Operation command mode selection),
Adjustment range
0: Terminal board
1: Panel
0: Internal potentiometer setting
1: VIA
2: VIB
3: Operation panel
4: Serial communication
5: External contact up/down
6: VIA+VIB (Override)
C-2
E6581158
Default setting
1
0