Analog Audio Cables; Digital Audio Cables; Video Cables; About Video Outputs Connection - Pioneer VSX-521 -K Operating Instructions Manual

Audio/video multi-channel receiver
Table of Contents

Advertisement

Connecting your equipment

Analog audio cables

Use stereo RCA phono cables to connect analog audio
components. These cables are typically red and white, and you
should connect the red plugs to R (right) terminals and white
plugs to L (left) terminals.
L
White (Left)
R
Red (Right)

Digital audio cables

Commercially available coaxial digital audio cables or optical
cables should be used to connect digital components to this
receiver.
C O A
X I A
L
I N
Coaxial digital
audio cable
Optical cable
Note
• When connecting optical cables, be careful when inserting the
plug not to damage the shutter protecting the optical socket.
• When storing optical cable, coil loosely. The cable may be
damaged if bent around sharp corners.
• You can also use a standard RCA video cable for coaxial digital
connections.

Video cables

Standard RCA video cables
These cables are the most common type of video connection and
are used to connect to the composite video terminals. The yellow
plugs distinguish them from cables for audio.
A U D
I O
Component video cables
Use component video cables to get the best possible color
reproduction of your video source. The color signal of the TV is
divided into the luminance (Y) signal and the color (P
signals and then output. In this way, interference between the
signals is avoided.
O P T
I C A
L
I N
Green (Y)
Blue (P
V I D
E O
Yellow
and P
)
B
R
C O
M P
O N
E N
Y
T V
I D E
P
O
B
P
R
)
Red (P
)
B
R

About video outputs connection

This receiver is not loaded with a video converter. When you use
component video cables or HDMI cables for connecting to the
input device, the same cables should be used for connecting to
the TV.
The signals input from the analog (composite and component)
video inputs of this unit will not be output from the HDMI OUT.
Playback component
Terminal for connection with source device
IN
IN
Y
P
P
B
R
HDMI
COMPONENT VIDEO
OUT
MONITOR
OUT
Y
P
P
B
R
HDMI
COMPONENT VIDEO
Terminal for connection with TV monitor
The OSD will not
appear.
Video signals can be output.
02
02
IN
VIDEO
MONITOR
OUT
VIDEO
TV
13
En

Advertisement

Table of Contents
loading

Table of Contents