Lens Setting; Focus Setting - Sanyo VCC-XZ400P Instruction Manual

PRIVACY MASK SETTING
PASSWORD setting
PASSWORD changes
C
You can change the password with
PASSWORD LOCK in either the ON or OFF
setting.
1
Use the CURSOR button (jldc) to
move the cursor to SET for PASSWORD
CHANGE in the PRIVACY MASK SETTING
screen. Then press the SET button.
The PASSWORD (NOW PASSWORD)
screen will appear.
2
Use the CURSOR button (d or c, j) to
enter the current password (e.g.1234),
then press the SET button.
The PASSWORD (NEW PASSWORD)
screen will appear.
3
Use the CURSOR button (d or c, j) to
enter a new password (e.g. 4321), then
press the SET button.
"OK" will appear.
4
Press the SET button again.
The PRIVACY MASK SETTING screen will
reappear.
5
To use the new password, please refer to
" A PASSWORD setting".

LENS SETTING

This lets you make settings such as automatic
and manual focus settings, zoom speed and
zoom ratio and DAY/NIGHT function settings.

FOCUS setting

These settings let you select automatic focus
(AUTO) or manual focus. Change the focus
settings in accordance with the monitoring
conditions.
In the MAIN MENU, use the CURSOR button
(j or l) to select SET for LENS, then press
the SET button.
The LENS screen will appear.
Setting the manual focus (MANU)
A
Sets a limit for near distance focusing and sets
focus speed for manual focus.
Use the CURSOR button (jldc) to select
MANU for FOCUS, then press the SET button.
The FOCUS SETTING screen will appear.
LIMIT NEAR focus distance setting
Use the CURSOR button (j or l) to move
the cursor to LIMIT NEAR, then use the
CURSOR button (d or c) to change the
distance value.
Available settings: 1M (meter), 3M, 10C
Note: Focusing becomes difficult when near
distance limit is set to less than "1M".
17
(centimeters), 30C, 50C